ohhunt® Ventilated Shotgun Rib Mount Picatinny - 3.35 inch 8 Slot

easy to use and it fits perfectly with winchester SXP Black Shadow.

Took awhile to get it, but the price was worth the wait.

It didn’t fit my 20 gauge tristar raptor as I expected. Had to make some modifications before it would fit my vent rib barrel

Mount is well made.

Mounting hardware was missing two screws and a plate with threaded holes. The one plate and screws that did come with it, were too long, and required filling down so as to not hit the barrel.

Overall this could be an excellent mount, but it does require work to make it fit properly.

I mounted mine on a 10 ga Browning BPS

I will be reaching out to customer service for a plate and two more screws to finish the install and zero red dot prior to spring turkey hunting season

Didn't fit at all not even worth sending back

The picatinny rail itself is of good enough and suitable or serviceable quality. The mounting hardware is not well suited to a specific application and requires special fitting efforts to make the whole system work. Specifically the mounting screws are of a generic length that must be trimmed to seat correctly. Also the **** blocks that apply the fastener force are too thick to correctly seat beneath the vent rib. These components must be treated as a "project" and special fitting is required.

Al ser de aluminio, el dispositivo se dobló durante el montaje, y, además, tuve que pagar más de 6'- € en concepto de tasas por aduanas.

Strong, well machined, and low profile. Weaver sides are down with top of vent.
With some imagination I used the small size's side adjustment screws to fit it to my Phoenix HP22A 3" barrel with a 1/4" wide vent rail, for my mini laser.
Will be painting it silver.

It won't fit on my shotgun with a low rib. I put it on another but had to cut the mounting screws because they hit the barrel. Other than that, it works fine.

Fit perfectly and very reasonable pcice!