Very good quality at less than half price of typical parts suppliers

Nice handguard for great price.

I love it and very easy to install and I love the design of my ar15 plus it’s very very light weight

So I finished my build, and when fully tight barrel nut and hand guard, the mounting holes are not at 12, 3, 6, 9 o’clock. However this does not bother me personally due to my light weight build. However I’m sure there are ways to fix this, overall look good, feels good, and works perfect for me.

Finally got my handguard after a month and three weeks, I have to say it was worth the wait. Handguard is the lightest I own and was the cheapest. Machine work is great.. It just shows how bad the other companies Rip us off.. buy from oh hunt!!

Surprisingly fast shipping. Looks good for how inexpensive it is. It is gonna look sweet

Awesome handguard love it

These represent about the lightest weight handguards I have found. I needed a few shims to true them up and if you want to install mlok devices then your easiest answer is the drill out the factory **** holes. Otherwise I had no problems with the rail mounts available here and the screws listed in the description. These were strong enough to endure a practical shooting course where the weapon was dropped, braced on concrete, and pretty much beat on for a full weekend and I had no issues. Great product at a great price.

Minimum barrel nut mill spec tork is 40 ft lb. For safety. I destroyed this barrel nut at just 40 pounds and gas tube hole was not close to lining up. Don't buy don't buy junk

AR-15 Ultra Lightweight Hex Free Float Handguard with Barrel Nut Honeycomb Round Tube 7" 9" 12" 15"

It's really that light. Same weight as carbon fiber at a tenth the cost.

Fits & looks good on my PCC

Pretty good hand guards.

These are decent looking handguards, both the honeycomb and the hex mlok. The price was extremely low and the fit somewhat reflects this, the threads inside the barrel nut weren't as close or tight as one would prefer and also the index tabs on the handguard are meant to align the picatiny rail to the one on the ar upper had so much play they were pretty much useless. But **** for 26 bucks a guy can make due so I'm actually impressed with what showed up to be quite honest. I definitely recommend these parts.

AR-15 Ultra Lightweight Hex Free Float Handguard with Barrel Nut Honeycomb Round Tube 7" 9" 12" 15"

very easy to install ,, shims a must have

DIDNT COME IWTH BARREL SHIMS TO MAKE SHURE THE TIMING WAS RIGHT ON THE RAILS

The hand guard was nice, but the barrel nut was a little off and needed some working. I would buy again.

I thought two of these and have been very pleased. They're extremely lightweight and are perfect for my lightweight build. Highly recommended!

Nice hand guard at cheap price, I'm guessing its chinese. I just can't figure out how to put it on my gun.

Nice size to fit a suppressor under.
Looks and fills great very happy.

Lightweight and easy to install. Great enhansement to any AR

This thing super light. Fits over my suppressed 10.5" pistol perfectly.

I wanted a handguard with a large enough ID to partially tuck the suppressor for a 10" .458 Socom and this fits the bill nearly perfectly. The honeycomb pattern is lightweight but still solid and open enough that it shouldn't transfer heat easily. My only complaint is the lack of a jam nut for timing purposes. Getting the rail mounting holes to line up at 12 and 6 is luck of the draw without one. Looks like I'll have to trim the back of the tube to align it and then loctite to keep it from moving. Still should be a wonderful thing.

Light looks cool but unsure what rails go with it or where to get them

The hand guard looks and feels great. While the hex shaped holes do not provide a means for attachments, there are **** holes that can be used. You would need to time the hand guard with shims so the holes are at 3,6 and 9 o’clock. I bought the hand guard to use in competition with an ultralight PCC. So far it fits that bill real well. Obviously, only time will tell how it holds up.

This handguard is excellent construction and finish. I would have paid an extra $10 dollars for 2 setscrews that match the flat spot on the barrel nut. Simple fix. I will buy this again despite the setscrews. Excellent value.

Would not recommend. Company said I waited to long for them to replace it. 2 months isn't too long, I don't' order things and immediately put build something. So, I will not be ordering anything from this company again. Also, you can't add any rails to it, not sure what the threaded holes are for, nothing fits. Stuck with a scope, cqb or Nothing.