• Multi-Footprint Red Dot Mount Adapter Plate
  • Multi-Footprint Red Dot Mount Adapter Plate for Shotgun
  • Multi-Footprint Red Dot Mount Adapter Plate for Shotgun
  • Multi-Footprint Red Dot Mount Adapter Plate for Shotgun
1 7

ohhunt

Multi-Footprint Red Dot Mount Adapter Plate for Shotgun | Compatible with RMR, RMSc/DPP, K Series, EPS, Docter, and C-MORE Red Dot Interfaces

Multi-Footprint Red Dot Mount Adapter Plate for Shotgun | Compatible with RMR, RMSc/DPP, K Series, EPS, Docter, and C-MORE Red Dot Interfaces

M2-DB

$39.99 USD
$39.99 USD
Распродажа Продано
Стоимость доставки рассчитывается при оформлении заказа.
Ships From

Доставка и возврат

  • Ships From: United States
    Estimated Delivery Time:     2~6 days.
  • Ships From: China
    Estimated Delivery Time:     10~15 days.

Note : For countries outside the United States, please choose to ship from China, other than the United States.

Материалы

United States:
For the “Ships From” option, please select “United States.” Orders shipped from the United States are not subject to customs duties.

Europe and other countries：
For the “Ships From” option, please select “China”.
Ohhunt is not responsible for any customs & taxes applied to your order. All fees imposed during or after shipping are the responsibility of the customer (tariffs, taxes, etc.).

This Red Dot Mount Adapter Plate with Multi-footprint compatible design, compatible with RMR, RMSc/DPP, K Series, EPS, Docter, and C-MORE red dot interfaces. No need to replace different-sized adapter. This Multi-Footprint Red Dot Mount Adapter Plate can be used for multiple purposes, being flexible and convenient.

Features:

  1. Multi-footprint Compatible Design: Compatible with RMR, RMSc/DPP, K Series, EPS, Docter, and C-MORE red dot interfaces.
  2. Installation Accessories: Includes an assortment of #8-40 and #6-48 screws in various lengths to ensure broad compatibility across different brands and models. Use the included screw set for direct installation.
  3. Material: Precision-machined aerospace-grade 7075 aluminum.
  4. Finish: Type III hard anodized finish.
  5. Torque Specification: 15 in-lbs. Please confirm your optic manufacturer's recommended torque before installation.

Mounting Shotgun Enclosed Micro Red Dot:

  • The ohhunt® utilizes an integrated universal mounting footprint that will work on most shotguns that have a drilled and tapped receiver. All needed mounting screws are included, and no additional mounting plates are required.
  • ohhunt® mount plate has three mounting locations. The Rear Mounting Hole, the Rear Mounting Channel, and the Front Mounting Channel.
The Correct Steps Followed:
  1. To install the M2–DB, position the red dot so that the Rear Mounting Hole on the red dot lines up with the furthest back mounting hole on your shotgun’s receiver.(When installing the alignment pins of the red dot, it is recommended to use the glue to reinforce the alignment pins.)
  2. Select the appropriate and correct screw size from the screws included in the box.
  3. Loosely screw in the Rear Mounting Hole screw. Do not fully tighten.
  4. Then loosely set your second mounting screw within the Front Mounting Channel. (If your set up allows, place a third and fourth mounting screw within the Front Mounting Channel and/or within the Rear Mounting Channel.)
  5. Once all screws are loosely set in place, tighten down the Rear Mounting Hole screw first to 12 in–lbs.
  6. Proceed to the furthest forward screw on the Front Mounting Channel and tighten to 12 in-lbs.
  7. Tighten the remaining screws to 12 in-lbs.
Просмотреть всю информацию

  • Бесплатная доставка по США

    🚚Корабль из Чикаго.
    Бесплатная доставка для всех заказов на сумму более 9,9 долларов США .
    Расчетное время доставки (USPS): от 2 до 6 рабочих дней.

    Подробнее о доставке 

  • Покупайте больше, экономьте больше

    🎟️ НОВЫЙ ПОЛЬЗОВАТЕЛЬСКИЙ КУПОН:
     Код: НОВЫЙ
     Получите $2.00 скидка на заказы свыше $10.00, только для нового пользователя.

    Больше купонов