ohhunt

ohhunt® AR15 Armorer's Barrel Nut Crown Nut Wrench für M4 M16 Multifunktionswerkzeug

Name: ohhunt® AR15 Armorer's Barrel Nut Castle Nut Wrench for M4 M16 Multi-Fuction Tool
Rating: 4.42 (55 reviews)

SKU:BANSHOU-03

$25.10 USD

Sale Ausverkauft

Versand wird beim Checkout berechnet

Typ Schraubenschlüssel A Schraubenschlüssel B Unterer Empfänger-Schraubstockblock + Oberer Empfänger-Schraubstockblock Kombination aus Schraubenschlüssel A und Schraubstockblock Schraubenschlüssel B + Schraubstockblock-Kombination

Schiffe von Vereinigte Staaten China

Versand & Rücksendungen

Versand aus: Vereinigte Staaten
Geschätzte Lieferzeit: 2–6 Tage.
Versand aus: China
Geschätzte Lieferzeit: 10–15 Tage.

Hinweis: Für Länder außerhalb der USA wählen Sie bitte den Versand aus China, nicht aus den USA.

Materialien

Vereinigte Staaten:
Wählen Sie für die Option „Versand aus“ bitte „Vereinigte Staaten“. Für Bestellungen, die aus den Vereinigten Staaten versandt werden, fallen keine Zollgebühren an.

Europa und andere Länder:
Wählen Sie für die Option „Versand aus“ bitte „China“.
Ohhunt ist nicht verantwortlich für Zollgebühren und Steuern, die auf Ihre Bestellung erhoben werden. Alle Gebühren, die während oder nach dem Versand anfallen, liegen in der Verantwortung des Kunden (Zölle, Steuern usw.).

Strapazierfähiges Universalwerkzeug sowohl für M16-Festschäfte als auch für M4-Teleskopschäfte der AR-15-Plattform. Ermöglicht die Installation/Demontage von Laufmuttern, Mündungsvorrichtungen und Hinterschäften. Dieses einzigartige Werkzeug kombiniert alle notwendigen Werkzeuge, um die Notwendigkeit des Besitzes mehrerer Schraubenschlüsseltypen zu eliminieren

AR-15/M4 BÜCHSENMACHER-SCHLÜSSEL:

Modellnummer: AR Büchsenmacher-Schlüssel
Farbe: Zinn
Material: Kohlenstoffstahl
Gewicht: 20,2 oz
Länge: 12,625 Zoll
Abmessungen der Artikelverpackung (L x B x H): 32 x 6,5 x 2,5 cm

CAR-Schaft mit 3-Punkt-Hutmutter / Sicherungsring
Installation / Demontage von Muttern, Kompensatoren & Rohren
Demontage / Installation von AR-15 Läufen
Empfängerrohr-Schaftmutternschlüssel
A1 / A2 Mündungsfeuerdämpfer-Schlitz / Receiver-Verlängerungen

HAUPTUNTERSCHIEDE ZWISCHEN DEN BEIDEN SCHLÜSSELN::

Schlüssel B: Die 3 Stifte an Schlüssel B haben einen etwas kleineren Durchmesser als die an Schlüssel A, wodurch sie perfekt in die Löcher der Laufmutter am Quad-Rail-Handschutz und dem 1.8 ID Handschutz passen. Er eignet sich auch für die Installation des MK18 Handschutzes.
Schlüssel A: Schlüssel A bietet mehr Funktionalität, aber bei Verwendung mit den drei oben genannten Handschützen ist etwas Schleifen erforderlich.

Vollständige Details anzeigen

Kostenloser US-Versand
🚚Schiff aus Chicago.
Kostenloser Versand für alle Bestellungen über 9,9 $ .
Voraussichtliche Lieferzeit (USPS): 2 bis 6 Werktage.
Mehr zum Versand
Kaufen Sie mehr, sparen Sie mehr
🎟️ NEUER BENUTZERGUTSCHEIN:
Code: NEU
Erhalten Sie 2,00 $ Rabatt auf Bestellungen über 10,00 $, nur für neue Benutzer.
Mehr Gutschein

5 stars: 41 (75%)
4 stars: 5 (9%)
3 stars: 4 (7%)
2 stars: 1 (2%)
1 star: 4 (7%)

Happy customer

I just happened up on OHhunt. Great prices and quality products. Shipping was a little slow. Very happy with my purchase and will be ordering again.

Ehhh

This thing didn’t really work that great. The dimensions didn’t fit the castle nut, or muzzle devices. I didn’t bother trying it on anything else after that.

Great product at great price.

Very pleased. Fast shipping. Good comms and great value.

ohhunt® AR15 Armorer's Barrel Nut Castle Nut Wrench for M4 M16 Multi-Fuction Tool

Very functional tools, well build and solid.

Not made for heavy work

I bought this Armorer’s Wrench to do change out hand guards meaning I needed to unscrew the barrel nut from the previous hand guard and then **** and tighten the new barrel nut. The wrench is not as well built as other Armorer’s Wrenches that I own. On trying to unscrew the previous barrel nut with the pin wrench portion, the pin sheared off and no other portion of the wrench fit. I did get the previous barrel nut off and used the Ohhunt wrench to tighten the new barrel nut on for the Ohhunt hand guard which uses the 3 pin circular wrench portion. I did have to profit the pins to the barrel nut because a painted? cover on the pins would not allow them to enter the holes. Overall, not a quality wrench. Maybe I got what I paid for.

Good price ok quality

Not bad for the money had to make a couple minor adjustments for mill spec stuff but seems ok great spare to have

Excellent

Fast shipping from the states. Product is very well built. Will buy again.

You get what you pay for.

Honestly the worst armorer's wrench I own, but also the cheapest. Decent for loaning to a friend who needs one. The one strong selling point is it has a decent finish on it, which is nice compared to some of the options

Polecam

Polecam.

Good quality

Thank you

I loved

It is very functional and of good quality

It was a gift

The whole order was a gift

great item

Poor quality

Item broke on first use and it has been a hassle to get a refund. Company is trying to say it is user fault instead of admitting the product quality is poor.

Poor quality

Spanner tip broke off during the first use.

Doesn't work with my OhHunt forend.

I checked, as per OhHunt's recommendation. They indicate that the fit is too sloppy to work without damaging the barrel nut. They do suggest an alternate wrench but have no idea where to find it.
The upper vise block won't fit my Aero upper either. A complete bust.

Ohhunt

All tools and parts worked perfectly.

AR-15 Armorer's Wrench for Barrel Nut Castle Nut M4 M16 Multi-Fuction Tool

Great wrench!

Had a cheapie wrench before that wouldn't stay on the castle nut. Got this one at a good price - love it. Nice grip on the handle and a lot better balance for torqueing.

Great upper receiver vice block

I bought the upper receiver vice block and when I received it I opened the bag it was in and took it out to look at it. When I separated the two halfs something fell out and I found it on the floor. When I looked at the block halfs I noticed that one side had two holes and the other side had one locating pin on closer inspection I saw a divot that matched the part that fell out. I glued the part back to where it belonged where it stayed until I used it to hold the upper receiver while I torqued the barrel nut holding the barrel to the receiver. It worked like it was supposed to even though a locating pin broke off in shipping which is not a big concern for me because I will drill a hole and install a new pin solving the issue. I am happy to have this new tool that works great and was affordable because the local stores wanted four times the price that I paid for it for the same thing.

AR Accessories

Accessories where good quality. Everything worked well on the upgrade. Looks very good on my rifle. Shipping was a little slow.

Armorers wench

WORKS AS ADVERTISED

Armorers combo wrench tool and upper receiver vise block

Received the items in good time and in good condition. I was impressed that it took longer to unpack the items from the packaging than to torque the barrel on my AR. Good addition to my shop at a good price,

Tool great, worried about block

Tool appears to both functional and strong, but slightly worried about the block and its longevity. Great price for what I got though.

Ohhunt Steel AR-15/M4/M16 Armorer’s Combo Wrench Tool Field Multi-function Wrench With Vise Block

Best BANG for Your Buck

Works great

Does what I need it to do

Fast shipping

Fast shipping and great products for the price

wrench

Takes awhile to ship but we did receive the product - it works great and the company tracked the shipping details for us and got our package the next day

79%

(4511)

11%

(605)

(246)

(122)

(226)

Exactly What I needed for my SBR

This was exactly what I needed to shorten my shroud so that I could put a can on my SBR... Very happy and will buy more.

Holes for gas tube nowhere close to lining up

Holes for gas tube nowhere close to lining up. Had to order a shim kit for it to be usable. I dont know why there is a Two sided threaded barrel nut.

Surpresure ready

Fit great, tucked my surpresure inside it. Tight lock up at the upper receiver.

Hand guard arrived quickly

Hand guard arrived quickly. The hand guard is very light weight the screws are pretty big. You must have an armor wrench to install it the barrel nut. Also, the barrel nut shims will help you align the barrel nut with the gas tube hose. Both are sold on this website. All in all nice hand guard for the price , I would buy again

Solid and Well priced

I used two of these so far, one on my block II build and another on a customers rifle. Both installed great. The flathead screws are a tad soft so use a **** driver that is the same thickness to prevent gouges. I would definitely buy more of these for future projects and would reccomend to others!

ohhunt® 11mm 3/8" Dovetail Cantilever Scope Mount 30mm 1 inch Dia Mount with Bubble Level

I’m very impressed with the OHUNT AR-15 handguard. The fit and finish are excellent, especially for the price. It feels solid and well made, and installation was straightforward with no issues. The handguard has a clean, modern look and provides plenty of room for accessories while keeping the overall setup lightweight and comfortable.

For the money, I think this is a great value. I would definitely consider buying another OHUNT handguard for a future build.

Fast delivery. Good product

BLOCK 2/RISII is yours…cheaper

I’m a content creator so I have a ton of free **** sent to me from companies, and the RISII handguard was always the best, in terms of lock up and zero of laser. This handguard PERFECTLY performs both jobs. This is more proof DD is ripping us off. I encourage you to get this, and prove me right. This thing rocks. I spent my own money on this specifically to be unbiased. This thing rocks, will be building a CQBr here soon, as my BLOCK 2 is now complete thanks to OhhHunt

Pretty good

This is not an exact clone rail, but but it's pretty close. I bought for a 12.5" build because I wasn't going to pay for a DD rail just to take a hacksaw to it immediately. The vent holes are aligned differently on the ohhunt, meaning you can't make a totally clean cut anywhere without leaving a half circle vent hole. Not a big deal, they didn't build it with people chopping them in mind. DD bolts all fit fine but a DD barrel nut does not. The DD nut is slightly shorter and this rail can't be properly tightened to it. Again, not a big deal, the supplied barrel nut is good quality. The finish is shiny but I don't care because it's getting spray painted, as I imagine everyone else's will be. My only real gripe, and the reason it's 4 stars instead of 5 is that I had to chop my bayonet lug to make the lower rail piece fit and that isn't necessary on a real RIS II. Other than the stuff I mentioned, it is extremely rigid and high quality, would buy again

1 2 3

Artikel wurde in den Warenkorb gelegt

ohhunt® AR15 Armorer's Barrel Nut Crown Nut Wrench für M4 M16 Multifunktionswerkzeug