• AR-15 Round Ultra Lightweight Hex Free Float Handguard
  • Which rail will fit this Lightweight handguard
  • AR Barrel Nut
1 11

ohhunt

ohhunt® AR-15 Protetor de mão de flutuação hexagonal ultraleve com tubo redondo de favo de mel com porca de barril 7" 9" 12" 15"

ohhunt® AR-15 Protetor de mão de flutuação hexagonal ultraleve com tubo redondo de favo de mel com porca de barril 7" 9" 12" 15"

M4X-7CUN

$37.90 USD
$37.90 USD
Em promoção Esgotado
Envio calculado na finalização da compra.
Comprimento
Envio de

Estimated Delivery Time

Ships From: United States
Estimated Delivery Time: 2 to 6 working days.

Note: Due to shipping restrictions, currently we are unable to ship handguards to other countries other than the United States, unless purchased in bulk(contact us). All other items can be shipped to most of the countries.

Este protetor de mão foi descontinuado há muito tempo, não há estoque. No momento, estamos planejando produzir uma versão atualizada deste protetor de mão, que pode não estar disponível até a segunda metade de 24, portanto, fique atento se estiver interessado. Se você tiver um pedido grande, entre em contato conosco com antecedência, talvez possamos agilizar o processo. .

CARACTERÍSTICA DO HANDGUARD HEX FREE FLOAT ULTRA LEVE:

Se o peso é uma das suas principais preocupações com o seu AR 15, este protetor de mão de flutuação livre hexagonal ultraleve é ​​o protetor de mão mais leve que oferecemos. Ele apresenta um design simples e utilitário com uma seção central serrilhada hexagonal ampliada para uma pegada confortável e segura. Ele se adapta a todos os receptores superiores de tamanho mil-spec e inclui uma porca cilíndrica para fácil instalação. Requer uma chave de porca padrão de armeiro.

  • Flutua livremente em seu barril para maior precisão potencial.
  • Serrilhado para aderência segura e confortável.
  • Os furos do trilho são ajustados em 3 6 9 e 12 horas, outros itens como luzes ou outros acessórios encontrarão um lugar se desejar.
  • Design de 7" 9" 12" 15", perfeito para sua construção AR.
  • Adapta-se a todos os receptores superiores Mil-Spec.
  • É necessário um sistema de gás de baixo perfil.
  • Hard Coat Preto Anodizado para Durabilidade.
  • Instala em minutos.

ESPECIFICAÇÕES:

  • Modelo: Trilho de proteção de mão hexagonal ultraleve
  • Características: Leve
  • Plataforma: AR-15
  • Estilo: Flutuação Livre
  • Comprimento: 7" 9" 12" 15"
  • Porca de barril incluída: sim
  • Tamanho da rosca da porca do barril: rosca americana 1 1/4-18UNC
  • Peso líquido da porca do barril: 45g
  • Espaçamento do furo do trilho: 1,15"/ 4 slots
  • Orifício do trilho : M4 (Ø0,145 "), parafusos Keymod universais cabem nele
  • Material: liga de alumínio 6061
  • Cor preta

👇Qual trilho cabe neste protetor de mão leve?👇

1、 Parafusos Keymod + Trilho Picatinny (5 slots, 9 slots de comprimento cabem nele)

Parâmetro de proteção de mão

Tipo Comprimento real Peso líquido (incluindo porca de barril)
7 polegadas 7,04" 4,58 onças / 130g
9 polegadas 8,93" 5,15 onças / 146g
12 polegadas 12,4" 6,42 onças / 182g
15 polegadas 14,84" 7,05 onças / 200g
OBSERVAÇÃO:
1. às vezes você pode precisar de alguns calços para cronometrar o protetor de mão, a maioria dos protetores de mão hexadecimais em estoque já foram configurados com calços de 2 peças , se você precisar de mais calços de porca de barril , compre aqui .
2. A porca cilíndrica de alumínio é significativamente mais leve que as porcas cilíndricas de aço, porém pode estar sujeita a danos durante a instalação. Recomendamos usar no máximo 35 libras de torque durante a instalação.
Ver detalhes completos

  • Free US Shipping

    🚚Ship from Chicago.
    Free Shipping for all orders over $10.
    Estimated delivery time(USPS): 2 to 6 working days.

    More about Shipping 

  • Buy More Save More

    🎟️NEW USER COUPON Code: NEW
    Get $2.00 off orders over $10.00, only for new user.
    🎟️Buy 5+, get a 5% OFF discount automatically.

    More Coupon 
  • 5 stars: 36 (73%)
  • 4 stars: 8 (16%)
  • 3 stars: 3 (6%)
  • 2 stars: 0 (0%)
  • 1 star: 2 (4%)
M
Mitch
Clean product great price

Very good quality at less than half price of typical parts suppliers

Mitch review photo
J
Jason S.
Float handguard

Nice handguard for great price.

Jason S. review photo Jason S. review photo
E
Eddie H.
Awesome ar hex free float and very light weight

I love it and very easy to install and I love the design of my ar15 plus it’s very very light weight

Eddie H. review photo Eddie H. review photo
J
Justin Z.
Use with no attachments

So I finished my build, and when fully tight barrel nut and hand guard, the mounting holes are not at 12, 3, 6, 9 o’clock. However this does not bother me personally due to my light weight build. However I’m sure there are ways to fix this, overall look good, feels good, and works perfect for me.

Justin Z. review photo
C
Customer
Updated review!!

Finally got my handguard after a month and three weeks, I have to say it was worth the wait. Handguard is the lightest I own and was the cheapest. Machine work is great.. It just shows how bad the other companies Rip us off.. buy from oh hunt!!

Customer review photo
P
Peter M.
Sweet

Surprisingly fast shipping. Looks good for how inexpensive it is. It is gonna look sweet

S
Scott M.

Awesome handguard love it

D
Daniel W.
Great value and rugged enough for a practical shooting course

These represent about the lightest weight handguards I have found. I needed a few shims to true them up and if you want to install mlok devices then your easiest answer is the drill out the factory **** holes. Otherwise I had no problems with the rail mounts available here and the screws listed in the description. These were strong enough to endure a practical shooting course where the weapon was dropped, braced on concrete, and pretty much beat on for a full weekend and I had no issues. Great product at a great price.

D
D.B.
Junk

Minimum barrel nut mill spec tork is 40 ft lb. For safety. I destroyed this barrel nut at just 40 pounds and gas tube hole was not close to lining up. Don't buy don't buy junk

D
DON C.

AR-15 Ultra Lightweight Hex Free Float Handguard with Barrel Nut Honeycomb Round Tube 7" 9" 12" 15"

Z
Zachary W.
Super lightweight

It's really that light. Same weight as carbon fiber at a tenth the cost.

B
BRYON
Nice!

Fits & looks good on my PCC

M
Marcus K.
Pretty good handguards

Pretty good hand guards.

S
Stan B.
AR handguards

These are decent looking handguards, both the honeycomb and the hex mlok. The price was extremely low and the fit somewhat reflects this, the threads inside the barrel nut weren't as close or tight as one would prefer and also the index tabs on the handguard are meant to align the picatiny rail to the one on the ar upper had so much play they were pretty much useless. But **** for 26 bucks a guy can make due so I'm actually impressed with what showed up to be quite honest. I definitely recommend these parts.

J
Jeffry R.

AR-15 Ultra Lightweight Hex Free Float Handguard with Barrel Nut Honeycomb Round Tube 7" 9" 12" 15"

D
Darrell C.
round hand guard

very easy to install ,, shims a must have

J
JUSTIN T.
BAD TIMING

DIDNT COME IWTH BARREL SHIMS TO MAKE SHURE THE TIMING WAS RIGHT ON THE RAILS

R
Ross J.
Awesome deal

The hand guard was nice, but the barrel nut was a little off and needed some working. I would buy again.

W
Wayne
Best handguard for a lightweight build

I thought two of these and have been very pleased. They're extremely lightweight and are perfect for my lightweight build. Highly recommended!

B
Bob V.
Nice hand guard

Nice hand guard at cheap price, I'm guessing its chinese. I just can't figure out how to put it on my gun.

T
TIMOTHY M.
Very light, Easy to time

Nice size to fit a suppressor under.
Looks and fills great very happy.

D
Donnie B.
Love it

Lightweight and easy to install. Great enhansement to any AR

J
Jerry
Nice and light

This thing super light. Fits over my suppressed 10.5" pistol perfectly.

J
Jake H.
Nice Handguard

I wanted a handguard with a large enough ID to partially tuck the suppressor for a 10" .458 Socom and this fits the bill nearly perfectly. The honeycomb pattern is lightweight but still solid and open enough that it shouldn't transfer heat easily. My only complaint is the lack of a jam nut for timing purposes. Getting the rail mounting holes to line up at 12 and 6 is luck of the draw without one. Looks like I'll have to trim the back of the tube to align it and then loctite to keep it from moving. Still should be a wonderful thing.

d
david w.
Rails

Light looks cool but unsure what rails go with it or where to get them

M
Michael H.
Looks great!

The hand guard looks and feels great. While the hex shaped holes do not provide a means for attachments, there are **** holes that can be used. You would need to time the hand guard with shims so the holes are at 3,6 and 9 o’clock. I bought the hand guard to use in competition with an ultralight PCC. So far it fits that bill real well. Obviously, only time will tell how it holds up.

M
Mark D.
Excellent lightweight handguard.

This handguard is excellent construction and finish. I would have paid an extra $10 dollars for 2 setscrews that match the flat spot on the barrel nut. Simple fix. I will buy this again despite the setscrews. Excellent value.

R
Ray H.
Barrel nut to brittle.

Would not recommend. Company said I waited to long for them to replace it. 2 months isn't too long, I don't' order things and immediately put build something. So, I will not be ordering anything from this company again. Also, you can't add any rails to it, not sure what the threaded holes are for, nothing fits. Stuck with a scope, cqb or Nothing.