Skip to product information
1 of 11

ohhunt

Shotgun Picatinny Rail Vent Rib Scope Mount for IZH-27,MR-153/155, MP-233, TOZ-120, MTs21-12, TOZ-84 carbine

Shotgun Picatinny Rail Vent Rib Scope Mount for IZH-27,MR-153/155, MP-233, TOZ-120, MTs21-12, TOZ-84 carbine

Regular price $6.90 USD
Regular price $9.99 USD Sale price $6.90 USD
Sale Sold out
Shipping calculated at checkout.
Size
Ships From

Free US Shipping

1. Free shipping for all orders over $10.
2. Estimated delivery time(USPS): 2 to 6 working days.

Pre-Order?

1. Pre-orders ship on or after 19/04/2024.
2. Do not select Pre-order items if you need them urgently.

Note: We have added 2 sets of screws of different lengths to this Vent Rib Mount Adapter to fit for more models. The additional screws are only limited to new orders shipped from China currently.

  1. Fit For: IZH-27,MR-153/155, MP-233, TOZ-120, MTs21-12, TOZ-84 carbine,  NOT fit for TOZ-34.
  2. This Ventilated Rib Picatinny Rail is designed to work with Shotgun Ventilated Rib (no wider than 7.9mm/.31 inch).
  3. The length of the picatinny rail is 55mm/85mm, which is long enough to fit most scopes and accessories.
  4. Do not over tighten the screws, stop tightening when resistance is felt.
  • Type: Vent Rib Mount Adapter
  • For: Shotgun
  • Rail: Picatinny Rail
  • Length: 55mm / 85mm
  • Screw length: 0.365"
  • Pins length: 0.31"
  • Wide: Ribs up to 7.9 mm wide
  • Net Weighs: 15g / 22 g
  • Material: High quality aluminum

HOW TO INSTALL THE VENT RIB MOUNT?

Installing the Vent Rib Mount Adapter does not require any firearm building, you can take it out of the box and install it on your gun in minutes. These rails attach as low as possible on the ribs for a slim profile that provides minimal interference with your weapon build.

The principle of installation consists in transverse blades that pass through the holes in the ventilated plate and are attracted by two screws. On the sides of the transition bar has 2 pins, providing additional fixation.

Make sure to use thread locker on screw, do not over tighten the screws, stop tightening when resistance is felt.

View full details

Customer Reviews

Based on 55 reviews
67%
(37)
9%
(5)
15%
(8)
7%
(4)
2%
(1)
P
Paolo P.
Very useful solution

Very useful. It would be advisable to have the possibility of a thinner bar which could pass in ventilate ribs with reduced space. In addition to have a version suitable for ribs larger than 10 mm.

J
Jack C.
Worked good

Put it on my Charles Daly 12ga. So far works well.

T
Thomas S.
it works

Not much to add it works

V
Vlad R.
ohhunt® Ventilated Shotgun Rib Mount Picatinny Rail - 3.35 inch 8 Slot

It was a little bit an issue to start with, but now it fit perfect. Waiting on my optic to come in to install it.

D
Donald H.
For my shotgun

Love it worked perfectly. Saved me from drilling holes in my shotgun

J
James L.

It looks like it's going to do the job and was pretty easy to put it on I would purchase a another one if I need Ed it

M
Milo S.
Didn't fit my shotgun rib it was too small

Quality of the product looks great but didn't fit my
Standard shotgun rib

T
Thomas S.
Lookin Good!

Mounted on Browning Maxus vent rib which has sloped underside of vent rib which puts underside plate at slight angle on forward attaching plate. Hopefully it holds accuracy.

D
Dan H.
Rail

All in all nice design , but the screws are junk Allen head’s stripped before they were tight !

M
Matthew B.
Did not fit my retay

Was to small to fit my retay had to put it on my wife's gun.